!

Diablo Racing Technology Aprilia RSV4 Fotpinnsats

Diablo Racing produkter har en full garanti mot att fotpinnarna bryts!

Det spelar ingen roll hur du bryter fotpinnarna! - Diablo Racing Technology ersätter dom!

Diablo Racing är ensamma i världen om detta konceptet!

- Fullt justerbara Racing fotpinnsatser
- justerbara i 8 positioner

- Alla fotpinnsatser är CNC frästa i högkvlitets T6 billet aluminium
- Finns tillgängliga i 6 olika färger. Hårdeloxerade för att motstå hårt bruk samt oxidation.
- Special räfflade för ett komfortabelt "non-slip grip"
- Rostfria dubbla kullager på både broms och växelförare, för mjuk rörelse utan vobbel.

ftrap001_p

LIGHTECH ADJUSTABLE REAR SET WITH FIXED FOOTPEGS APRILIA RSV4 09-

Woodcraft Aprilia RSV4 Full Rearsets

Woodcraft is proud to introduce our rearsets for the beautiful new Aprilia RSV4. The rearset kit consists of the rearset plates, footpegs, heel guards and all of the needed hardware (shift rods, etc) to install the kit properly.

They are much stronger than OEM rearset's and will give your bike a look that will separate you from the crowd.

This kit is designed specifically for the RSV4 to give you the optimum foot position and ground clearance for racing or track days. This kit has 6 possible peg locations moving the pegs in the following range : (Up 1/4-3/4" &Back 1/8-5/8"). This kit includes CFM 3 piece billet shift and brake pedals.

Our rearsets are machined from tough, aircraft grade 6061 T6 aluminum. We chose this material specifically because it provides the best combination of strength and durability. Other grades, such as 7075 generally tend to crack, instead of bend, when they are met with an impact.

The use of 6061 allows our brackets to simply bend under stress instead of snapping off or cracking when they are crashed heavily. Rearsets made from 6061 can be often bent straight or even be welded (by a certified welder) whereas 7075 tends simply to crack or break and is much more difficult to weld.

(Up 1/4-3/4" & Back 1/8-5/8")

Woodcraft Apr Mille/MilleR 98-03, Tuono 02-05 Rearsets, Std

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. Special CFM eccentric adjusters are provided so that you can adjust the position of the shift and brake pedal tip. These rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back 1/2"

Aprilia Mille/MilleR GP Shift Conversion Kit (08-5712)

This kit consists of the shifter, shift rod and shift arm to covert to GP shift, just like the Aprilia factory piece (at a fraction of the cost).

Note: Does not work on OEM rearsets.